396.269 items | 3.314 manufacturer | 575 user online | 07:26 [CET]
DELIVERY COUNTRY
0 Item/s 0 GBP
Accessories/spare parts for test and EV-TEST100
Source photo:
HT
(fig. might be different or similar)

Accessories/spare parts for test and EV-TEST100

EAN/GTIN: 8052870670113
WEEE: DE 14132415
Manufacturer: HT
Manufacturer no.: EV-TEST100
Manufact.-SKU: 1010960
Customs tariff no.: 85444290
Similar top items: Show now & compare
440,33 GBP Price incl. VAT (0,00 GBP)
plus shipping
Delivery time:
13-15 days [GB] Items to be procured that can be ordered (no central warehouse item) - live request to the central warehouse directly in the cart or click the link below the price >Quantity available?<
pce

We always deliver the latest available article version.
Minimum order value (UK): 150 EUR (Sub total)

Note:
The installation of electrical devices may only be carried out by an approved electrician and, in the case of high-voltage systems (> = 400V and country-specific nominal power), only with the consent of the respective electricity network operator.

Details

bought
Useful
Interesting

Test adapter for e-charging stations EV-TEST100 Type of accessory/spare part Measuring probe, accessories, with case/bag, plug-in technology 4 mm, material of the insulating material polyvinyl chloride (PVC), max. working voltage 415V, current carrying capacity 10A, measuring circuit category CAT III, The EV-Test100 was developed as an accessory specifically for testing e-charging stations. It can be used to simulate charging states and to test the effectiveness of protective measures at type 3 e-charging stations with a type 2 connector. Easy handling in combination with the Combi G3 or Combi G2 is guaranteed. Measuring functions Universal 4mm sockets for connection to a 1 or 3 phase installation tester using measuring lines (banana plugs) Separate phase display using three LEDs for easy voltage checking Proximity Pilot (PP) rotary switch for simulating different current capacities of charging cables Control Pilot (CP) rotary switch for simulation of the electrical vehicle status A, B, CD error Rotary switch to simulate a short circuit between CP and PE (state E = error) Simulation PE error (ground error) Connection for the CP signal output to check the communication between adapter (= simulated electric vehicle) and charging station Type 2 plug for connection to the charging station even with a permanently connected charging cable Vehicle simulation (CP): The different vehicle states A to D can be simulated using a rotary switch (according to IEC 61851) Cable simulation (PP): The different codings for charging cables with 13. 20, 32 and 63 A as well as “no cable connected” can be simulated using a rotary switch Error simulation: Simulation of a short circuit between CP and PE using a rotary switch (state E = error) Display of the phase voltages via LEDs Testing of e-charging stations even when the charging cable is permanently connected For vehicle simulation (CP): According to IEC 61851, states A, B, C, D and E can be simulated. The different vehicle states are set using the rotary switch. State A: no vehicle connected State B: vehicle connected but not ready for charging State C: vehicle connected and ready to charge, ventilation of the loading area not required State D: vehicle connected and ready to charge, ventilation of the loading area required State E: Error : Short circuit CP-PE via internal diode For cable simulation (PP): The different codings for charging cables with 13, 20, 32 and 63 A can be simulated. It is also possible to simulate the state of no cable. The different charging cables are simulated by switching different resistors between PP and PE using the rotary switch. According to IEC 61851 the following values are possible: No cable: 8 ohm 13 A cable: 1.5 k ohm 20 A cable: 680 ohm 32 A cable: 220 ohm 63 A cable. 100 ohms

More product images:

Product image 1 HT EV TEST100 Accessories spare parts for test and
Product image 1
Product image 2 HT EV TEST100 Accessories spare parts for test and
Product image 2
CLOSE