223.522 items | 2.839 manufacturer | 764 user online | 07:48 [CET]
0 Item/s 0 USD
Boiling water unit 5l 2kW SNU HOT + HOT 3in1cr
Source photo:
Stiebel Eltron
(fig. might be different or similar)

Boiling water unit 5l 2kW SNU HOT + HOT 3in1cr

EAN/GTIN: 4017212322529
Manufacturer: Stiebel Eltron
Manufacturer no.: SNU HOT + HOT 3in1cr
Manufact.-SKU: 232252
Customs tariff no.: 85161080
Similar top items: Show now & compare
694,87 USD Price incl. VAT (0,00 USD)
plus shipping
Delivery time:
14-15 days [US] Items to be procured that can be ordered (no central warehouse item) - live request to the central warehouse directly in the cart or click the link below the price >Quantity available?<
Last check: 02-03-2021 13:01

We always deliver the latest available article version.

The installation of electrical devices may only be carried out by an approved electrician and, in the case of high-voltage systems (> = 400V and country-specific nominal power), only with the consent of the respective electricity network operator.



Boiling water machine SNU HOT + HOT 3in1cr, nominal content = 5 l, connected load = 2 kW, material of the container = plastic, color of the container = white, control element = 1 lever, fitting surface = chrome-plated, temperature selection = 65..97 ° C, with Continuous cooking level = yes, with signal lamp = yes, with acoustic cooking signal = no, height (from the middle of the water connection) = 421 mm, width = 263 mm, depth = 230 mm, weight = 2.8 kg, hot water machine for the immediate use of almost 100 ° C boiling hot water without waiting. Suitable for the quick preparation of hot drinks and dishes as well as the cleaning of heavily soiled dishes - both in the household and in the commercial sector, such as small offices and medical practices. The SNU Hot is a space-saving system consisting of a 5 liter under-counter storage in open design (unpressurized) and the special HOT 3in1 kitchen tap. This tap has a handle for drawing hot water from the storage tank and a mixing lever for cold and warm water from the central hot water supply. For safety reasons, the tap handle for the hot water has a push-turn mechanism. Furthermore, the hot water in the fitting is led separately, so that the surface of the fitting can be handled safely. Due to the open design, the tap of hot water is low in steam and spray. There is no steam escaping from the tap while the water is being heated. After hot water has been drawn off, the water remaining in the tap runs back into the storage tank so that freshly heated water can be drawn off the next time the tap is drawn off. The storage has a polystyrene rigid foam thermal insulation for low heat losses. The electronic temperature control with automatic cooking point detection controls the electrical heating and keeps the water temperature at a maximum of 97 ° C (depending on the boiling temperature). Automatic dry cycle detection and additional protective temperature limiter. Electrical connection via supplied cable with Schuko plug.