KNX shutter/blind actuator 6fold 230V, DRA JA.6.230. Very high quality and unique price-/ performance relationship Our own direct distribution (directly ex works) enables us to provide extremely advantageous prices. Thus, you will be able to save more than 30% compared with similar high-quality products. The KNX blind-/shutter actuator JA.6.230 is a MDRC device to be mounted on a 35mm DIN-rail and to be installed into elctrical distributors. The actuator switches up to 6 electrical devices (motors 230V AC). Programmable from ETS 4 and higher. EIBMARKT® GmbH Holding (www.eibmarkt.de) presents a new 230V EIB/KNX shutter/blind actuator 6-fold (N000303) with manual operation (mounting method DRA, modular spacings 6). Special advantages are: Use of bistabile relays, only with this can a preferred state be set in case of bus failure, no additional power supply (KNX only), little space required and a very comprehensive ETS application. The actuator offers extensive additional parameters, such as Scenes (1 bit/1 byte) for runtime and slat, lock, automatic, security and alarm functions, weather alarms (6 pc), driving limit functions, position feedback (1 bit/1 byte) and many more. The device also has 6 independent measurement functions. Sensor readings (KNX) can be processed, tested and passed in various formats (1bit up to 2byte exp.).
ETS application details:
Measured value processing : Readings ( 1 bit .. 2Byte EXP) come from KNX sensors via bus, regardless of actuator outputs usable, correction / manipulation, addition + multiplication factor, range monitoring, threshold for alarm function adjustable output can be used as alarm source for actuator - device ´´ life message´´ cyclic object value 1/0 - button function disable / enable via 1bit object - activated homing via 1bit object - blind / shutter operation behavior on bus failure / recovery - Adaptation to drive, start / exit delay - Move to position directly / on end positions, 10 pre-definable positions - scenes 1-byte object, device is assigned to 6 different scenes - Automatic mode: about 1 bit object activated / deactivated, 4 automatic functions, eg Rain, wind, frost, sun or other programmable priorities among themselves, response to activation / deactivation of automatic, 1-byte object for position in automatic mode runtime / slats - lock, 1 bit object behavior in lock programmable - Restriction driving range about 1 bit object activated / deactivated, limits above / below 1 byte objects during the run changeable - Security: 6 alarm sources selected from data processing, priorities among themselves parameterized, response to activation / deactivation of alarms, acknowledgment alarm about 1bit object - restraint: 1 bit or 2 bits operation, response to activation / deactivation of priority control - status: Status output 2 byte object + group status, status of automatic 1-byte object + group status, state security 1-byte object + group status, status, current direction 1bit object status position valid 1bit object status end position up / down 2x 1 bit object status curtain 1-byte object slat status 1 byte object status intermediate position 1, 1 bit object, sending on reaching the position, status intermediate position 2, 1 bit object, sending on reaching the position
The switch position displays indicate the current driving direction of the drives. Thus, the connected drives can also be activated manually using the assigned key. The blind/shutter actuator JA.6.230 is a device to be mounted on a 35mm DIN-rail and to be installed into electrical distributors. In connection with the product database and ETS-software the actuator serves to control up to 6 electrical devices (motors) with different functions each. Several ETS-software adjustments permit application as blind and shutter actuator. Power supply for the device is realized by EIB only, no other power supply is required. Connection to the bus (EIB, KNX TP1) is made by means of the supplied bus terminal. Connection of the devices is guaranteed by integrated screw terminals. Thanks to their potential-free contacts, the outputs are able to switch loads with a current of up to 3A.
Number of outputs: 4 relays ch. NC/NO contact with manual operating mode Switching delays: 1 output: appr. 1 sec., 6 outpus appr. 3 sec. Load conn. w. screw terminals: min. Ř 0,1mm/ max. 2x 2,5mm˛ Rated voltage: 230V AC Max. current 230V AC: 3A AC3 EMC and low voltage directive: CE, EIB, KNX Electrical safety, protection: IP20, EN60 529 MDRC casing for DIN rail assembly: 6 width units, DIN rail 35mm, DIN EN50 022 Measurements: 105 x 90 x 60 (W x H x D) Weight: 0,4 kg Temperature at normal operation: -5°C...45°C Temperature at storage: -25°C...55°C Temperature at transportation: -25°C...70°C Product database (Application ETS): Shutter/Blind/Universal
photographed by EIB3D.COM
More product images:
View on the left
View on the right
View up front
View top left
View top right
Top rear view
The expert jury has awarded the parent company EIBMARKT® GmbH the title "BEST OF 2015" in the category "Entertainment 3D“. This first-rate product (3D reprography in e-commerce - www.eib3D.com, a subsidiary of EIBMARKT® GmbH Holding) has particularly convinced the jury and, thus, belongs to the top group of all applications submitted. This product was photographed by www.EIB3D.com.
Fees may not apply starting from a specific cart value and depending on the country (e.g. PayPal), see cart. As an option, payment methode charges or service charges for the order value are calculated and displayed in the cart (Prices incl. tax).
Method of payment
Plus standard charge
Plus % value
Cash in advance
Cash on delivery
Payment methods given here might not be available in the cart depending on the country and charges could vary depending on country of destination (basis: selected country of destination)
Delivery on the next workday under the following conditions:
If the order is received by 8 a.m. Mon to Fri, the goods will be handed over to DHL (if all items are available) on the same day. Generally, you will receive the goods on the next workday. The status can be checked in our mail "Delivery information" (at 6.30 p.m. on the day the order is received) with integrated DHL Track & Trace link since not all regions in Germany are delivered by DHL daily.
The country of destination is Germany.
The order is not placed on a day that is a public holiday in Bavaria or Saxony.
The item is not bulky.
The order includes central warehouse items (green), only, and availability has been checked by the customer using the link "Check availability" at the item or in the cart by clicking on the required quantity.
The order is placed with a payment method that ensures an immediate release for delivery e.g. no cash in advance should be selected in the cart because with these payment methods the order is not released before receipt of payment.
Order by 8 a.m. from MON-FRI > Delivery on the following day
Order from SAT-SUN > Delivery on Tuesday
This 24-hour service is currently free of charge!
Here we provide a link to Google image search with an article-specific,
predefined search enquiry with Google. That means you receive images
immediately without any further click. Important: we are neither liable nor
give any guarantee for the correctness of the images displayed by Google. This
is just an additional cost-free service to search for image data we do not
have under Google. We are not able to verify or confirm in a binding way
whether the pictures shown there really match the articles we sell! To be on
the safe side you should always contact the manufacturer directly. If we do
not provide pictures, we generally provide the link to the manufacturer
directly under the message "No picture available".
Despite careful control we do not assume any liability for the content of the
external links. It is only the providers of these websites who are responsible
for the content of the linked pages. For the information given on this website
exists exclusion of liability and protection of copyright.
Delivery limits to EU countries
Deliveries to EU countries are, meanwhile, standard procedure for many shop systems. However, only few shop operators are aware of the fact that there are very important tax laws and limit value regulations that have to be respected when delivering to private people within the EU. For every EU country turnover limits are in effect (so-called delivery limits) acc. to § 3c Value-Added Tax Act (German: UStG) When these limits are reached or exceeded, shop operators can no longer send deliveries to private people (only to companies with registration of their sales tax identification number) in the current financial year unless the shop operator has been registered in the respective country as company with regard to the value-added tax. When the delivery limit has been exceeded and more deliveries are made to private people in this country, the value-added tax is due in this EU country of destination and has to be paid directly to the fiscal authorities in this country. There are many EU countries where the value-added tax is considerably higher than in Germany. Certainly, the fiscal authorities can also change these regulations retroactively. An active implementation would currently mean the end of their business activities for many shop systems, since the back duty of the countries of destination can be huge and the delivery limits are quite low in many countries. Last year, our neighbour Austria, for example, cut the delivery value limit almost in half to an annual turnover of EUR 35,000. Many shop systems are also not able to provide the technical background to include such complex tax systems for the EU and third countries in their invoicing or even to implement the whole system of delivery limits to countries. We, too, have reached these delivery limits for some countries very early in the current financial year and, thus, can no longer deliver to private people in these countries They will be informed during the ordering process insofar as they have registered as private people, the goods leave Germany to be delivered to a destination in the EU (country of destination) and the delivery limit for the respective EU country has already been exceeded.
Our Shop system www.eibmarkt.com calculates fully-automatically the turnover generated with sales to private and corporate customers in the respective EU countries with regard to the turnover limit and cancels the order process if the registration form indicates that the customer is a private person, goods leave the German territory and the delivery limit has been reached or exceeded.
We would like to point out that people acting as entrepreneurs (USt-ID) are not affected by these regulations.
According to unofficial publication s of the EU Commission the applicable delivery limits in other EU member countries are as follows as per 1 September 2011:
Please take into account that the shipping costs include the DHL additional charge
for "Remote Area". Your registration indicated that you have selected a delivery address
for which DHL charges an extra fee. Remote Areas are remote regions that,
DHL delivers only seldom and at additional expenditure.
Möchten Sie unseren neuen eibabo® Shop mobile optimiert nutzen?